|
Recessed Camera & 6" Rear View Mirror Monitor
system
£149.99
** DISCONTINUED **
|
Reverse camera kit suitable for cars, vans, motorhomes, campervans and
coaches. The Discrete Monitor in Rear View Mirror automatically switches from
mirror to colour TFT monitor when reverse gear is engaged. AV Extension leads
are available enabling this system to be fitted to a fixed body vehicle of just about any
length. |
|
CAMRM6 Kit contains:
-
5½
inch Rear View Mirror Monitor
-
Recessed Camera
-
30mm
Hole Saw (Drill Bit) for fitting recessed Camera.
-
Remote Control for Monitor
-
9 metres of AV cable. Monitor to Camera.
-
Wiring
for vehicle
-
Fitting
Instructions
-
12 month guarantee
|
|
|
Approximate Cable Lengths:
-
Cable length between rear mounted Camera and
Monitor is 9 metres
i
5 metre monitor extension lead is available from our
accessories section
-
Length of Rear View Mirror Monitor Power
cable is 30cm (extendable)
-
Length of Camera Power cable is 1.5m
(extendable)
Monitor dimensions:
-
Total Height: 102mm
-
Total Width: 250mm
-
Monitor Depth: 40mm without clamps
-
Monitor Depth: 55mm including mirror clamp
-
Clamps onto vehicle Rear View Mirror with
height between 60mm and 90mm
-
Two AV inputs enabling the connection of a
second camera or DVD player
-
Colour: Black
Wiring
and Installation
The Monitor clamps onto
the existing vehicles rear view mirror, completely covering it and
replacing it's function. T he
components are supplied pre-plugged and ready to install, with the
exception of the following that must be connected to the
vehicle's 12 Volt power supply:
Camera Power Supply:
|
|
Rear View Mirror Monitor Power Supply:
-
Blue
Wire - Connect to the Revering light positive feed.
-
Black
Wire - Connect to a negative power supply (ground)
-
Red
Wire - Connect to ignition positive power
supply.
The price
you see is the price you pay, there are NO hidden extras. All our prices
include VAT and delivery within the United Kingdom
Please ensure you read our Terms
and Conditions, for estimated delivery times click
here.
Click on any of the following images to enlarge:
|
Front view of Monitor in Clamp on Rear
View Mirror fitted to vehicle |
Dimensions of Camera Front
|
|
Front view of Monitor in Clamp on Rear
View Mirror |
Side of Camera (Depth)
|
|
Bottom view of Monitor in Clamp on Rear
View Mirror
Back view of Monitor in Clamp on Rear View
Mirror |
Total of 9 metres of AV cable supplied |
CAMR - Recessed Camera technical details:
| Image
Device: |
1/3" CMOS Colour
OV7910 |
| TV
System: |
PAL/NTSC |
| Number
of Pixels: |
PAL: 510(H) x 492(V); NTSC:
628(H) x
582(V) |
|
Sensing Area: |
5.78mm x 4.19mm
x/4.69mm x 3.54mm |
| Synch System |
internal |
| Resolution: |
380 TV Lines |
| Minimum illumination: |
3Lux/F1.2 (0 Lux when infrared LED on) |
| Lens: |
3.6mm / 92deg |
| Mirror: |
SHIFT (two wires outside) |
| Night Vision range: |
5m |
| S/N ratio: |
More than 48db |
| Electronic Shutter: |
1/60 - 1/15,000 seconds |
| Video Output: |
RCA Connector, 1.0vp-p, 75ohm |
| Current Consumption: |
130mA |
| Power Supply: |
12Vdv |
| Operating temperature: |
-10 to 50 degrees centigrade RH95% Max |
| White Balance: |
Automatic White Balance, AGC & BLC |
| Size: |
30mm x 42mm |
| Weight: |
Approx 75g |
Recessed Camera fitted to Ford Transit
rear door
Recessed Camera fitted to Citroen Berlingo
rear bumper.
 |
All our products
conform to EC standards. |
|
| |
|
![Visa Delta [1258 bytes]](http://parking-sensors-direct.co.uk/photos/VISD.gif){kind=small}
